You’re having a blast surfing the internet when a “No Internet, Secured” error message suddenly pops up. It’s a weird and cryptic message, but what’s clear is that your internet connection has stopped working.

Web pages won’t open, and you can’t download a thing! What’s going on? It’s much simpler than you think to fix the issue on a Windows 10 or 11 PC.

This error message can be somewhat confusing if you don’t know much about how your internet connection works. However, it makes perfect sense when you think about it.

You see, your computer isn’t directly connected to the internet. Instead, you have a device such as a network router passing information to the Wide Area Network (WAN). However, your computer is also networked to other devices the router serves inside your home. That’s known as the Local Area Network (LAN), and this network will keep working even if something goes wrong with your internet connection.

The “No Internet, Secured” status message simply means that while your connection to the Wi-Fi router is fine and adequately encrypted (“Secured”), you aren’t receiving any data. We need to determine why the internet connection is dead to solve this issue.

The most common reason you may see this error is that your ISP’s internet connection is down. That’s not your fault, and it means there’s nothing wrong on your end. The easiest way to check for this is to see whether you have an internet connection through a different device on the same router.

If you can access the web through another device like your smartphone but not your Windows PC, you know the problem must be with your computer, not the internet connection.

If you’re using fiber or DSL, you can sometimes request a connection reset by the Internet Service Provider (ISP). How you do this depends on the ISP. You might have an app, a support email address, or a phone number. Whatever channel you use, contacting your ISP is a good first step to resolving problems with internet connectivity outages.

If other devices but your computer can access the internet, verify that your computer is connected to the correct network. It’s a silly detail, but make sure you’re connected to the right Wi-Fi network before poking around for a fix.

You may have accidentally connected to a Wi-Fi network that doesn’t have an internet connection. Perhaps you have a GoPro that you left on or a mobile hotspot that doesn’t have a SIM card.

Virtual Private Networks (VPNs) can help you surf the internet more securely and privately. However, they can occasionally disrupt your device’s internet connection. If you have an active VPN app on your PC, turn it off and check if that stops the “No Internet, secured” error.

VPNs can also malfunction if they’re buggy or outdated. Therefore, we recommend updating your VPN app and keeping it up-to-date.

Before touching your Windows computer, unplug your router’s power and leave it unplugged for a few minutes. Afterward, reconnect the Wi-Fi router to the wall outlet and power it back on. This simple trick can clear the “No Internet, Secured” connection error in the Windows system tray or notification area.

While you’re at it, reboot your computer as well. It can’t hurt, and this also has a chance of resolving the issue without further effort.

Restoring your PC’s internet settings to factory default is another way to resolve the “No Internet, secured” error and other network-related issues.

If your PC runs Windows 11, go to Settings > Network & Internet > Advanced network settings > Network reset and select Reset now.

In Windows 10, head to Settings > Network & Internet > Status > Network reset and select Reset now.

Windows will reboot your computer after the network reset operation. Reconnect your PC to the Wi-Fi network and check if you can access the internet.

Since this error is specific to Wi-Fi connections, it might be a problem with your actual Wi-Fi hardware or software. Try connecting the Windows 10 or 11 computer to the router via Ethernet instead. If the internet connection starts working, it’s a sign that the problem is either with the Wi-Fi hardware, network drivers, or how the Wi-Fi has been configured on the computer or the router itself.

If there’s a misconfiguration problem on your Windows computer, one quick way to get to the bottom of it is by using Windows’ network troubleshooter.

In Windows 11, head to Settings > System > Troubleshoot > Other troubleshooters and select Run next to “Internet Connections.”

If your PC runs Windows 10, go to Settings > Network & Internet > Status > Change your network settings and select Network troubleshooter. You can also run the network troubleshooter through the Control Panel.

The troubleshooter will show a report once it diagnoses your PC. If possible, it will tell you that problems were found and repaired. Hopefully, that will solve your internet connection issue. Alternatively, it may tell you what’s wrong but won’t be able to fix it. You should use that information to inform your troubleshooting efforts further.

Although Microsoft doesn’t recommend disabling the Internet Protocol version 6 (IPv6), doing so could temporarily fix connection problems in Windows 10 and 11.

Re-enable the IPv6 protocol if the error persists or other Windows components malfunction when you disable IPv6.

IP address problems often cause this error, and a fast way to resolve it is to get the computer in question to release the IP address the router has assigned to it. Then your computer will simply ask the router for a new IP address, which hopefully doesn’t have any conflicts.

Refer to our tutorial on renewing or refreshing IP addresses in Windows for detailed instructions.

You should also flush your PC’s DNS cache using the IPconfig utility through the Windows Command Prompt or PowerShell. To flush your DNS cache, do this:

Close Windows Powershell when you see a “Successfully flushed the DNS Resolver Cache” success message. That should fix any IP-related problems and restore internet access to the Wi-Fi network.

Network-related errors in Windows crop up in older versions of the operating system. If you haven’t updated your computer in a long time, install the latest Windows version available for your computer.

Go to Settings > Windows Update (or Updates & security in Windows 10) and select Check for updates or Install all.

Interestingly, a broken Windows update can also cause this error. It’s impossible to say whether this is just a case of buggy updates. Still, there’s no harm in rolling back the most recent Windows update to see if it makes any difference and fixes the error.

To undo the last Windows update, here’s what to do:

In Windows 10, go to Settings > Update & Security > Recovery > Go back to the previous version of Windows 10 and select Get Started.

If your last Windows update was somehow related to the error, it should all work again. Remember that Windows does not keep the updated recovery data indefinitely. So if it’s been a long time since your last update, you may not be able to roll the update back. That said, if the update wasn’t recent, it probably isn’t related to your problem.

Windows might update your network drivers occasionally, which can occasionally cause issues. You can roll your Wi-Fi or Ethernet card’s driver back to a stable version that worked properly. Refer to our tutorial on rolling back drivers in Windows for step-by-step instructions.

Your computer might fail to connect to the internet if its network adapters are bug-ridden or outdated. Updating your computer’s network adapter might resolve the “No Internet Secured” error.

Alternatively, right-click the Windows icon on your PC’s taskbar and select Device Manager on the pop-up menu.

Restart your computer when the uninstallation is complete. Windows will automatically (re)install the driver when your computer comes back on. Connect your PC to a Wi-Fi network and check if reinstalling the network driver resolved the problem.

Hopefully, the simple set of tips above will quickly have your internet connection up and running like normal. If you didn’t find the help you needed, refer to our tutorial on troubleshooting internet connectivity failures in Windows.

The tutorial covers other causes and troubleshooting fixes for complex network-related problems like IP address conflicts.